Bsa bantam d7 an older restoration has been sitting in my garage for a few years and needs a new home, it runs ok and has been fitted with coil ignition.wheel rims are a bit rusty has a v5 but is not on sorn as it has been off the road so long. kevin ...

1968 bsa Bantam. All matching with original registration. Requires restoration. All gears select. Missing chrome strips on tank otherwise mainly complete. Any questions please ask. Bike is a non runner.

Hi there, up for grabs here is a 1961 bsa Bantam 125cc classic british motorbike, this was last on the road in 1971!!! so would require some work as ...brown log book is included...this is a very original bike in this condition..an ideal start for a restoration project... any questions please call me on: ... ...many thanks for ... ...

...D1 and denotes a 1958 D1. Metalwork is sound and will make great basis for restoration. Saddle, toolbox, Frame and mudguards all in good condition. Forks and wheels straight and solid. Engine is actually 125cc D1 (bd3B 22480 denotes 1954 D3). There are no docs for this bike. These are simple bikes to work and parts readily available. I have ...

1966 bsa bantam D7 restoration project that never got finished due to other commitments. frame was shotblasted then hand painted ( not A bad finish)other parts have been stripped and painted, tank, tinware still need respray. wheels pitted but polish up ok spokes have been painted. engine turns over with good compression and gears select. bike is loosely bolted ...

This auction is for a 1960 bsa Bantam 175cc D7. This bike is in original condition and in working order it is a runner! The bike comes with a ...fresh fuel and a new battery on it. The bike would be ideal for a restoration project to get it back to original condition. As you can imagine it has ...

Bsa bantam unfinished project, some parts missing, needs speedo, clutch and throttle cables, wiring sorting, switches etc,chain, chainguard, engine turns with good compression. there is no paperwork but engine and frame numbers are clearly visable! engine number fd7 10425. frame number d7 7958. lots of work already done it just needs finishing. any questions email or ring. buyer ...

...since 1974 with old style log book so can be registered for new v5 with bsa club ive already checked that out before working on the bike see old pics that how bad a state it was in so i stripped the bike down much work has been done listed below frame powder coated seat will be recovered most parts ...

Hi there, Here is my little bsa Bantam D1 plunger 125cc of about 1952/3 ish ere. I have owned it for about 4 year now and built it up from a very large box of bits. i have completely rebuilt the engine with new bearings, seals, new piston and rings (std) and a nos std bore barrel. new ...

Excellent restoration project, the bike was found in an attic, I started cleaning it up, but work commitments etc. will never do it justice, so I have decided to sell it. The engine has been running and has had a new clutch, frame and engine numbers match, everything is there except the mudguards which is a mystery after they ...